Horizontal Drilling, Fracking Begins in Old, Shallow Oil and Gas
22 September 2013
By Anya Litvak
If we could take a tiny glass elevator down the trajectory of a
Marcellus Shale well, we would see slabs of coal, sandstone, shale
and siltstone alternating and colliding with one another for
thousands of feet until we finally reach the target rock.
Today, half a dozen local oil and gas companies are forgoing the
full ride. They're getting off the elevator halfway down, before
the Elk Sandstone formation that separates the conventional oil
and gas reservoirs from the deeper, unconventional plays across
the old oil and gas fields of Pennsylvania.
These reservoirs that have been fueling this region for decades
all but faded into an afterthought when the Marcellus Shale boom
redefined the industry five years ago.
As Bill Zagorski, vice president of geology with Range Resources,
which pioneered development of the Marcellus region, recently told
a group of mostly small companies at an industry conference,
"We're able to look at these old plays with horizontal eyes, with
That means drilling horizontal wells as shallow as 2,000 feet
underground and fracturing, or fracking, them to force more fuel
to the surface.
The verdict on most of these efforts won't be known to the public
until next February, when companies are required to file their
production reports for this year.
Texas-based Range Resources, one of the biggest players in the
Marcellus, isn't downsizing its overall ambitions.
It's still forcing drill bits a mile underground to reap Marcellus
bounty. Instead, the shallower fields are opportunities for
smaller, perhaps family-owned oil and gas companies that until now
have been squeezed out of the game, Mr. Zagorski said.
That's exactly what Mark Thompson was thinking when he founded
Horizontal Exploration LLC two years ago.
Mr. Thompson has been drilling shallow, vertical oil and gas wells
into the Upper Devonian sandstones with his Indiana, Pa.-based
company Mid-East Oil for 35 years.
The newer business, Horizontal Exploration, was designed to profit
from technology and services that followed Marcellus operators
into Pennsylvania in recent years.
Horizontal Exploration has drilled three horizontal, or lateral,
wells so far and has permits for another eight in Pennsylvania.
It fracked the first well this month and is awaiting results.
The wells are about 2,000 feet deep and extend between 3,300 feet
and 5,300 feet horizontally.
"We think you should be able to do these for $800,000 to $900,000
[per well]," Mr. Thompson said.
But at the moment, the company is spending about $1.3 million a
pop. It's still toward the bottom of the learning curve, he
A Marcellus well, by contrast, can run anywhere from $4 million to
$10 million. It needs, on average, 5 million gallons of water for
Horizontal Exploration is using only about 120,000 gallons of
fluid to frack its shallow wells.
The conventional laterals will never produce anywhere near the
amount of oil and gas coming out of the deeper Marcellus wells,
but Mr. Thompson is hoping for at least 10 times the bounty of a
vertical shallow well and a quicker payback period -- about 18
months, compared to four years.
The Upper Devonian sandstones are thinner than the Marcellus. Some
are only 20 feet thick compared with the Marcellus' average
thickness of 70 feet or more, said Dan Billman, president of
Mars-based Billman Geologic Consultants Inc., which helps
companies identify suitable spots to sink both conventional and
While shale rock is tight and relatively impermeable, sandstone is
porous and oil and gas easily flow through its tunnels.
That means the pressure needed to frack it is a fraction of what's
required for a deep shale well.
And some conventional horizontal wells are designed not to be
fracked at all, Mr. Billman said.
One of the earliest horizontal shallow wells in Pennsylvania, with
advice from Mr. Billman, was drilled by Freeport-based Phoenix
Energy Productions in 2010.
Since then, the company has drilled two more horizontal wells in
Washington County and hasn't fracked any of them.
Penneco Oil Company Inc. in Delmont, on the other hand, has been
fracking horizontal shallow wells for several years now. It
perforates the casing at more than a dozen stages and pumps
"off-the-shelf" frack fluid additives into oil and gas formations
about 3,200 feet under Greene, Westmoreland and Allegheny counties
with great success, according to Penneco's COO Ben Wallace.
"We hear this from a lot of drillers -- they get called because
oil and gas companies look up our completion reports," Mr. Wallace
Penneco's sandstone wells cost "several million" dollars to
complete, Mr. Wallace said, and the company plans to drill about
10 horizontals a year.
While the wells are closer to the surface and to water aquifers,
companies and the Department of Environmental Protection say
there's no reason to think fluids or fuel will reach the water.
"We certainly have less history on these wells, but so far no
problems," said Alan Eichler, DEP's Southwest regional oil and gas
Shallower wells don't need the same force to be fracked as deep
wells, he said, and coal-bed methane wells, which are also
shallow, "have been fracked for years without any problems to
But Mr. Eichler noted that coal-bed methane, which crumbles a lot
easier than sandstone, likely needs even less pressure during a
frack than wells like Penneco's.
More will be known in the near future, as this type of drilling
picks up steam.
Several other companies, such as Warren County-based Pennsylvania
General Energy and South Side-based Catalyst Energy have secured
permits from the Department of Environmental Protection to drill
horizontally in shallow reservoirs.
Shallow, or conventional, drillers report their production
annually, not every six months as Marcellus operators must, so the
results of these efforts won't be available until next year.
Anya Litvak: firstname.lastname@example.org or 412-263-1455.